Battery Reconditioning

Battery reconditioning : Nickel-Cadmium batteries or often referred to as NiCad batteries are primarily used in gaming devices, appliances and tools that require a rechargeable power source. These batteries, when reconditioned, help lengthen the expected life span, ensure safety from landfill risks and even save money. When a NiCad battery starts to recondition, the memories erased from the latter will enable a rechargeable battery hold for longer charging. Learn from NiCad battery reconditioning guide here.

Battery Reconditioning

NiCad Battery Reconditioning | Ways and Tips

Battery reconditioning can be quite a tricky job depending on the kind of batteries you’re using. In this article are eight ways on how to recondition NiCad batteries.

1. Don’t forget the following materials you need:
   • An old NiCad battery.
   • Battery tester or digital multi-meter.
   • Long-sleeved shirt or any protective gear. Don’t forget to include insulated gloves and safety goggles.
   • A 12-volt battery charger.
2. Check out the positive and negative ends of your NiCad rechargeable battery. The positive end is indicated by a plus sign while the negative end (raised in flat) is indicated by a minus sign.
3. Use the battery tester (or digital multi-meter as alternative) in testing the NiCad batteries. The testing is done in order to ensure that the batteries are fully discharged prior to its restoration process. The NiCad battery is fully discharged after usage or its functions enabled in many hand-held appliances such as digital cameras.
4. Wear any protective gear including the safety goggles and insulated gloves.
5. Start the battery reconditioning process by holding the black clamp attached in the 12-volt battery charger carefully.
6. Gently tap the NiCad battery’s positive end using the battery charger’s red clamp. This is done in order to enable the recondition of the battery’s memory.
7. Hold back in place the black and red clamps for three seconds before releasing them. Make sure that you’re not touching both clamps during this process.
8. Repeat the reconditioning process until the NiCad battery is fully charged.

As you begin your battery reconditioning process, these are a few tips.

NiCad Battery Reconditioning | Few Tips You Must Take Note

• Seek help or assistance from any person whom you know are professional in battery reconditioning. It doesn’t necessarily have to be a licensed electrician. It can be your relative or friend, as long as he knows the pros and cons of reconditioning. This tip is something to ponder if it’s your first time to recondition your battery.
• Only recondition those batteries which can enable a rechargeable memory. Remember that not all appliances have batteries that are susceptible to reconditioning. Seek an expert for assurance of which batteries are allowed to be reconditioned.
• Remove the NiCad battery’s “Dendrite Crystals” with the use of electric current. The dendrite crystals are essential in restoring the battery charger’s memory (or battery life in some cases).
• Don’t rush while reconditioning your battery. Take a lot of time and most importantly, focus. Analyze first the proper way of holding the battery’s positive and negative ends. Be very careful when using the 12-volt battery charger. This is to ensure your safety from electric-related accidents.

Battery reconditioning is a great way to save a lot of money and you can make a lot of money from battery reconditioning business.

Battery Reconditioning